Skip to content
  • Birger Koblitz's avatar
    ramips: add support for Asus RT-AC85P · fde8e2e0
    Birger Koblitz authored and ynezz's avatar ynezz committed
    
    
    SoC:	MediaTek MT7621AT dual-core @ 880MHz
    RAM:	256M (Winbond W632GG6KB-1)
    FLASH:	128MB (Macronix MX30LF1G18AC-TI)
    WiFi:	- 2.4GHz MediaTek MT7615N bgn
    	- 5GHz MediaTek MT7615N nac
    Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN)
    USB:	1 x USB 3.1 (Gen 1)
    BTN:	Reset, WPS
    LED:	- Power (blue)
    	- 5Ghz (blue)
    	- 2.4GHz (blue)
    	- Internet (blue)
    	- 4x LAN (blue)
    	(LAN/WAN leds are not controllable by GPIOs)
    UART: 	UART is present as Pads marked J4 on the PCB.
    	3.3V - TX - RX - GND / 57600-8N1
    	3.3V is the square pad
    MAC:	The MAC address on the router-label matches the MAC of
    	the 2.4 GHz WiFi.
    	LAN and WAN MAC are identical: MAC_LABEL+4
    	5 GHz WiFi MAC: also MAC_LABEL+4
    
    Installation
    ------------
    Via U-Boot tftpd:
    Switch on device, within 2s press reset button and keep pressed
    until power LED starts blinking slowly.
    Upload factory image via tftp put, the router's ip is 192.168.1.1
    and expects the client on 192.168.1.75.
    
    The images also work on the Asus RT-AC65P models as tested by Gabor.
    
    Signed-off-by: default avatarBirger Koblitz <mail@birger-koblitz.de>
    Tested-by: default avatarGabor Varga <vargagab@gmail.com>
    [fixed Asus -> ASUS in DTS]
    Signed-off-by: ynezz's avatarPetr Štetiar <ynezz@true.cz>
    fde8e2e0