Skip to content
  • Birger Koblitz's avatar
    ramips: add support for Edimax RG21S · f285e863
    Birger Koblitz authored and ynezz's avatar ynezz committed
    SoC:	MediaTek MT7621AT dual-core @ 880MHz
    RAM:	256M (Nanya NT5CC128M)
    FLASH:	16MB (Macronix MX25L12835F)
    WiFi:	- 2.4GHz MediaTek MT7615N bgn
    	- 5GHz MediaTek MT7615N nac
    Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN)
    USB:	No
    BTN:	Reset, WPS
    LED:	4 red LEDs, indistinguishable when casing closed
    UART: 	UART is present as Pads marked J1 on the PCB.
    	3.3V - RX - GND - TX / 57600-8N1
    	3.3V is the square pad
    
    Installation
    ------------
    Update the factory image via the OEM web-interface
    (by default:http://192.168.1.1
    
    )
    The sysupgrade image can be installed via TFTP from
    the U-Boot bootloader. Connect ethernet port 2.
    
    Signed-off-by: default avatarBirger Koblitz <mail@birger-koblitz.de>
    [flash node rename, EDIMAX -> Edimax, complete device model name]
    Signed-off-by: ynezz's avatarPetr Štetiar <ynezz@true.cz>
    f285e863