Commit 3819c163 authored by Hal Martin's avatar Hal Martin Committed by Hauke Mehrtens
Browse files

sunxi: Add support for Banana Pi M2 Ultra



CPU: Allwinner R40 Quad-Core Cortex-A7 @ 1.2GHz
GPU: Mali 400 MP2
Memory: 2GB DDR3 onboard (shared with GPU)
Onboard: Storage microSD card slot
Onboard: Storage 8GB eMMC
Onboard: Network 10/100/1000M Ethernet RJ45
Onboard: Network WiFi 802.11b/g/n 1x1 (AMPAK AP6212; brcmfmac)
Onboard header: SPI, I2C, GPIO, UART
USB: Two USB 2.0 Host, One USB 2.0 OTG

Known issues:
- WiFi doesn't work
- eMMC not supported
Signed-off-by: default avatarHal Martin <hal.martin@gmail.com>
parent f4da28c3
......@@ -247,6 +247,12 @@ define U-Boot/orangepi_pc2
UENV:=a64
endef
define U-Boot/Sinovoip_BPI_M2_Ultra
BUILD_SUBTARGET:=cortexa7
NAME:=Bananapi M2 Ultra
BUILD_DEVICES:=sun8i-r40-bananapi-m2-ultra
endef
UBOOT_TARGETS := \
A10-OLinuXino-Lime \
A13-OLinuXino \
......@@ -281,6 +287,7 @@ UBOOT_TARGETS := \
pangolin \
pine64_plus \
Sinovoip_BPI_M2_Plus \
Sinovoip_BPI_M2_Ultra \
sopine_baseboard \
orangepi_zero_plus
......
--- /dev/null
+++ b/configs/Sinovoip_BPI_M2_Ultra_defconfig
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN8I_R40=y
+CONFIG_DRAM_CLK=576
+CONFIG_DRAM_ZQ=3881979
+CONFIG_MACPWR="PA17"
+CONFIG_MMC0_CD_PIN="PH13"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_AHCI=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra"
+CONFIG_SCSI_AHCI=y
+CONFIG_RGMII=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_AXP_DLDO4_VOLT=2500
+CONFIG_AXP_ELDO3_VOLT=1200
+CONFIG_SCSI=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
......@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
ARCH:=arm
BOARD:=sunxi
BOARDNAME:=Allwinner A1x/A20/A3x
BOARDNAME:=Allwinner A1x/A20/A3x/R40
FEATURES:=fpu usb ext4 display rtc squashfs
SUBTARGETS:=cortexa8 cortexa7 cortexa53
MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
......@@ -23,6 +23,7 @@ KERNELNAME:=zImage dtbs
# A31: quad Cortex-A7
# A80: octa Cortex-A15/A7
# H3: quad Cortex-A7
# R40: quad Cortex-A7
include $(INCLUDE_DIR)/target.mk
......
......@@ -7,6 +7,6 @@
include $(TOPDIR)/rules.mk
BOARDNAME:=Allwinner A20/A3x
BOARDNAME:=Allwinner A20/A3x/R40
CPU_TYPE:=cortex-a7
CPU_SUBTYPE:=neon-vfpv4
......@@ -239,4 +239,14 @@ endef
TARGET_DEVICES += sun7i-a20-pcduino3
define Device/sun8i-r40-bananapi-m2-ultra
DEVICE_VENDOR := LeMaker
DEVICE_MODEL := Banana Pi M2 Ultra
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-core kmod-ata-sunxi
SUPPORTED_DEVICES:=lemaker,bananapi-m2-ultra
SUNXI_DTS:=sun8i-r40-bananapi-m2-ultra
endef
TARGET_DEVICES += sun8i-r40-bananapi-m2-ultra
endif
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment