openwrt issues
https://code.fe80.eu/openwrt/openwrt/-/issues
2019-09-10T10:46:42Z
https://code.fe80.eu/openwrt/openwrt/-/issues/2327
/boot mounted multiple times
2019-09-10T10:46:42Z
aparcar
/boot mounted multiple times
Username: Kevin 'ldir' Darbyshire-Bryant
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=2327
Supply the following if possible:
- Device problem occurs on- seen on x86 APU2 - may be others.
- Software versions of OpenWr...
Username: Kevin 'ldir' Darbyshire-Bryant
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=2327
Supply the following if possible:
- Device problem occurs on- seen on x86 APU2 - may be others.
- Software versions of OpenWrt master
- Steps to reproduce - boot system
root@Router:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 14080 14080 0 100% /rom
tmpfs 2011892 156 2011736 0% /tmp
/dev/loop0 246016 15140 161244 9% /overlay
overlayfs:/overlay 246016 15140 161244 9% /
/dev/sda1 16112 4172 11616 26% /boot
/dev/sda1 16112 4172 11616 26% /boot
tmpfs 512 0 512 0% /dev
root@Router:/etc/config# block info
/dev/loop0: UUID=”cbbd153a-60b0-40e0-800e-b79833957b9f” VERSION=”1.12” MOUNT=”/overlay” TYPE=”f2fs” /dev/sda1: UUID=”57f8f4bc-abf4-655f-bf67-946fc0f9f25b” VERSION=”1.0” MOUNT=”/boot” TYPE=”ext4” /dev/sda2: UUID=”b9caa0dd-b7eb255f-2c2775da-3aa40e49” VERSION=”4.0” MOUNT=”/rom” TYPE=”squashfs” /dev/sda3: UUID=”e92b8416-fe49-409b-a4cf-c71476027159” VERSION=”1.12” MOUNT=”/mnt/sda3” TYPE=”f2fs” root@Router:/etc/config# cat /etc/config/fstab
config global
option anon_swap '0'
option anon_mount '0'
option auto_swap '1'
option auto_mount '1'
option delay_root '5'
option check_fs '1'
config mount
option target '/mnt/loop0'
option uuid 'dd87006a-ba8e-44f4-a40b-f2cb6181dc4e'
option enabled '0'
config mount
option target '/mnt/sda1'
option uuid '57f8f4bc-abf4-655f-bf67-946fc0f9f25b'
option enabled '0'
config mount
option target '/mnt/sda2'
option uuid '8a1c0748-3d6b7bd1-0192e5c4-7fe0165c'
option enabled '0'
config mount
option target '/mnt/sda3'
option uuid 'e92b8416-fe49-409b-a4cf-c71476027159'
option enabled '1'
root@Router:/etc/config# uname -a
Linux Router 4.14.126 #0 SMP Tue Jun 18 09:45:23 2019 x86_64 GNU/Linux
https://code.fe80.eu/openwrt/openwrt/-/issues/2283
m76: crash when creating an additional monitor interface
2019-09-10T10:46:43Z
aparcar
m76: crash when creating an additional monitor interface
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=2283
OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1
While debugging an unicast wifi bug, I tried to cre...
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=2283
OpenWrt: b65a270c851ee422f26a0af10c879ebb87cb8f76
mt76: 4.14.108+2019-03-27-a11b6734-1
While debugging an unicast wifi bug, I tried to create a mon0 interface
iw wlan0 interface add mon0 type monitor.
Modules: mt7603e@830f0000+87a0 mt76@83128000+6060 mac80211@83080000+6a240 iptable_raw@83111000+2e0 iptable_nat@831c5000+340 iptable_mangle@83bd7000+400 iptable_filter@83135000+360 ipt_REJECT@831c3000+3a0 ipt_MASQUERADE@8311f000+280 ipt_ECN@83bca000+560 ip_tables@831c0000+2650 cfg80211@83000000+35fb0 xt_time@83bbd000+6c0 xt_tcpudp@83baa000+6e0 xt_tcpmss@831ac000+400 xt_statistic@8311d000+320 xt_state@83151000+2a0xt_recent@831ae000+1bf0 xt_nat@83bd0000+5e0 xt_multiport@83bd6000+4e0 xt_mark@83134000+280 xt_mac@83bd3000+240 xt_limit@8315f000+480 xt_length@83125000+2a0 xt_hl@83132000+300 xt_helper@83126000+340 xt_ecn@83127000+520 xt_dscp@8313c000+3c0 xt_conntrack@83ba8000+8e0 xt_connmark@8311c000+420 xt_connlimit@83136000+1110 xt_connbytes@83bcd000+620 xt_comment@83117000+1c0 xt_TCPMSS@83bd2000+800 xt_REDIRECT@83bce000+2a0 xt_LOG@83bcc000+280 xt_HL@83bc9000+520 xt_FLOWOFFLOAD@83bc7000+ab0 xt_DSCP@8313b000+5c0 xt_CT@8313d000+9e0 xt_CLASSIFY@83131000+220 x_tables@83bc0000+30f0 nf_reject_ipv4@83130000+780 nf_nat_redirect@8311e000+560 nf_nat_masquerade_ipv4@83bac000+590 nf_conntrack_ipv4@83bb8000+1100 nf_nat_ipv4@83bba000+c70 nf_nat@83120000+2250 nf_log_ipv4@83bad000+dc0 nf_log_common@83116000+980 nf_flow_table_hw@83bbe000+820 nf_flow_table@83ba4000+3310 nf_defrag_ipv4@83153000+3e0 nf_conntrack_rtcache@83112000+8a0 compat@83118000+1700 act_connmark@83113000+850 nf_conntrack@83100000+d2c0 sch_tbf@8314e000+1680 sch_ingress@8314a000+4a0 sch_htb@83ba0000+36d0 sch_hfsc@83158000+39e0 em_u32@831ba000+200 cls_u32@83154000+2330 cls_tcindex@8314c000+15c0 cls_route@831be000+1540 cls_matchall@831a3000+a20 cls_fw@83144000+1000 cls_flow@83148000+1780 cls_basic@831bb000+d00 act_skbedit@831b4000+9f0 act_mirred@831b5000+e50 ifb@831a0000+be0 l2tp_ip@8316e000+1410 l2tp_eth@831a4000+a00 l2tp_netlink@831a6000+1f90 l2tp_core@831a8000+3110 udp_tunnel@83b99000+920 leds_gpio@83b4f000+b20 gpio_button_hotplug@83b50000+1900
<6>[ 0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.197077] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.203431] NET: Registered protocol family 1
<7>[ 0.207612] PCI: CLS 0 bytes, default 32
<4>[ 0.210849] Crashlog allocated RAM at address 0x3f00000
<6>[ 0.217463] workingset: timestamp_bits=30 max_order=14 bucket_order=0
<6>[ 0.229138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 0.234765] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[ 0.254072] io scheduler noop registered
<6>[ 0.257804] io scheduler deadline registered (default)
<6>[ 0.263580] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
<6>[ 0.270756] console [ttyS0] disabled
<6>[ 0.274257] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
<6>[ 0.282984] console [ttyS0] enabled
<6>[ 0.289970] bootconsole [early0] disabled
<3>[ 0.298544] cacheinfo: Failed to find cpu0 device node
<4>[ 0.303799] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[ 0.310628] spi-mt7621 10000b00.spi: sys_freq: 193333333
<6>[ 0.329261] m25p80 spi0.0: s25fl064k (8192 Kbytes)
<5>[ 0.334207] 4 fixed-partitions partitions found on MTD device spi0.0
<5>[ 0.340643] Creating 4 MTD partitions on "spi0.0":
<5>[ 0.345526] 0x000000000000-0x000000020000 : "boot"
<5>[ 0.351255] 0x000000020000-0x0000007c0000 : "firmware"
<5>[ 0.359405] 2 tplink-fw partitions found on MTD device firmware
<5>[ 0.365482] Creating 2 MTD partitions on "firmware":
<5>[ 0.370527] 0x000000000000-0x00000014f3a3 : "kernel"
<5>[ 0.376451] 0x00000014f3a4-0x0000007a0000 : "rootfs"
<5>[ 0.382277] mtd: device 3 (rootfs) set to be root filesystem
<5>[ 0.389534] 1 squashfs-split partitions found on MTD device rootfs
<5>[ 0.395888] 0x000000390000-0x0000007a0000 : "rootfs_data"
<5>[ 0.402220] 0x0000007c0000-0x0000007d0000 : "config"
<5>[ 0.408051] 0x0000007d0000-0x000000800000 : "factory"
<6>[ 0.414688] libphy: Fixed MDIO Bus: probed
<6>[ 0.431000] rt3050-esw 10110000.esw: link changed 0x00
<6>[ 0.437801] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
<6>[ 0.447188] NET: Registered protocol family 17
<6>[ 0.451831] 8021q: 802.1Q VLAN Support v1.8
<6>[ 0.468953] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[ 0.476929] Freeing unused kernel memory: 136K
<4>[ 0.481474] This architecture does not have kernel memory protection.
<14>[ 1.719920] init: Console is alive
<14>[ 1.723707] init: - watchdog -
<5>[ 2.267376] random: fast init done
<14>[ 3.000227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<14>[ 3.073195] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[ 3.091032] init: - preinit -
<6>[ 4.256850] rt3050-esw 10110000.esw: link changed 0x00
<5>[ 4.687762] random: procd: uninitialized urandom read (4 bytes read)
<13>[ 4.780523] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
<12>[ 4.822673] urandom-seed: Seed file not found (/etc/urandom.seed)
<14>[ 4.918017] procd: - early -
<14>[ 4.921055] procd: - watchdog -
<14>[ 5.550307] procd: - watchdog -
<14>[ 5.553880] procd: - ubus -
<5>[ 5.600493] random: ubusd: uninitialized urandom read (4 bytes read)
<5>[ 5.667639] random: ubusd: uninitialized urandom read (4 bytes read)
<14>[ 5.675598] procd: - init -
<14>[ 6.002174] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[ 6.011883] l2tp_core: L2TP core driver, V2.0
<6>[ 6.017941] l2tp_netlink: L2TP netlink interface
<6>[ 6.024375] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[ 6.032295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[ 6.044769] Mirror/redirect action on
<6>[ 6.141161] u32 classifier
<6>[ 6.143986] input device check on
<6>[ 6.147693] Actions configured
<6>[ 6.239795] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<6>[ 6.260517] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
<6>[ 6.268272] Backport generated by backports.git v4.19.23-1-0-g480a925a
<6>[ 6.488990] xt_time: kernel timezone is -0000
<6>[ 6.514755] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 6.566528] mt76_wmac 10300000.wmac: ASIC revision: 76280001
<6>[ 7.593554] mt76_wmac 10300000.wmac: Firmware Version: 20151201
<6>[ 7.599575] mt76_wmac 10300000.wmac: Build Time: 20151201183641
<6>[ 7.621350] mt76_wmac 10300000.wmac: firmware init done
<6>[ 7.728549] rt3050-esw 10110000.esw: link changed 0x01
<7>[ 7.792147] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<14>[ 7.802137] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[ 9.177342] urandom_read: 6 callbacks suppressed
<5>[ 9.177353] random: jshn: uninitialized urandom read (4 bytes read)
<6>[ 11.971477] rt3050-esw 10110000.esw: link changed 0x00
<6>[ 15.521829] rt3050-esw 10110000.esw: link changed 0x01
<6>[ 40.298153] rt3050-esw 10110000.esw: link changed 0x00
<6>[ 43.783225] rt3050-esw 10110000.esw: link changed 0x01
<6>[ 44.432507] device eth0 entered promiscuous mode
<6>[ 50.910274] br-lan: port 1(eth0.1) entered blocking state
<6>[ 50.915855] br-lan: port 1(eth0.1) entered disabled state
<6>[ 50.921660] device eth0.1 entered promiscuous mode
<6>[ 50.939619] br-lan: port 1(eth0.1) entered blocking state
<6>[ 50.945176] br-lan: port 1(eth0.1) entered forwarding state
<6>[ 51.073380] br-lan: port 1(eth0.1) entered disabled state
<6>[ 51.080911] device eth0.1 left promiscuous mode
<6>[ 51.085686] br-lan: port 1(eth0.1) entered disabled state
<6>[ 51.170750] br-lan: port 1(eth0.1) entered blocking state
<6>[ 51.176313] br-lan: port 1(eth0.1) entered disabled state
<6>[ 51.182108] device eth0.1 entered promiscuous mode
<6>[ 51.234695] br-lan: port 1(eth0.1) entered blocking state
<6>[ 51.240185] br-lan: port 1(eth0.1) entered forwarding state
<6>[ 54.284409] br-lan: port 2(wlan0) entered blocking state
<6>[ 54.290155] br-lan: port 2(wlan0) entered disabled state
<6>[ 54.295937] device wlan0 entered promiscuous mode
<6>[ 55.227079] br-lan: port 2(wlan0) entered blocking state
<6>[ 55.232548] br-lan: port 2(wlan0) entered forwarding state
<6>[ 65.499313] device wlan0 left promiscuous mode
<6>[ 65.504001] br-lan: port 2(wlan0) entered disabled state
<6>[ 67.659749] br-lan: port 2(wlan0) entered blocking state
<6>[ 67.665252] br-lan: port 2(wlan0) entered disabled state
<6>[ 67.670929] device wlan0 entered promiscuous mode
<6>[ 67.675848] br-lan: port 2(wlan0) entered blocking state
<6>[ 67.681236] br-lan: port 2(wlan0) entered forwarding state
<6>[ 67.687263] br-lan: port 2(wlan0) entered disabled state
<6>[ 70.171904] br-lan: port 2(wlan0) entered blocking state
<6>[ 70.177326] br-lan: port 2(wlan0) entered forwarding state
<4>[ 74.063128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
<4>[ 74.076565] jffs2_build_filesystem(): unlocking the mtd device...
<4>[ 74.076626] done.
<4>[ 74.084920] jffs2_build_filesystem(): erasing all blocks after the end marker...
<5>[ 75.341427] random: crng init done
<4>[ 89.806667] done.
<5>[ 89.808667] jffs2: notice: (2808) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<4>[ 90.097054] overlayfs: upper fs does not support tmpfile.
<6>[95491.758861] device wlan0 left promiscuous mode
<6>[95491.763556] br-lan: port 2(wlan0) entered disabled state
<6>[95496.123525] br-lan: port 2(wlan0) entered blocking state
<6>[95496.128998] br-lan: port 2(wlan0) entered disabled state
<6>[95496.134779] device wlan0 entered promiscuous mode
<6>[95496.139678] br-lan: port 2(wlan0) entered blocking state
<6>[95496.145064] br-lan: port 2(wlan0) entered forwarding state
<6>[95496.151480] br-lan: port 2(wlan0) entered disabled state
<6>[95497.434477] br-lan: port 2(wlan0) entered blocking state
<6>[95497.439926] br-lan: port 2(wlan0) entered forwarding state
<6>[181891.461089] device wlan0 left promiscuous mode
<6>[181891.465866] br-lan: port 2(wlan0) entered disabled state
<6>[181895.862824] br-lan: port 2(wlan0) entered blocking state
<6>[181895.868387] br-lan: port 2(wlan0) entered disabled state
<6>[181895.874262] device wlan0 entered promiscuous mode
<6>[181897.223872] br-lan: port 2(wlan0) entered blocking state
<6>[181897.229417] br-lan: port 2(wlan0) entered forwarding state
<6>[268291.119138] device wlan0 left promiscuous mode
<6>[268291.123910] br-lan: port 2(wlan0) entered disabled state
<6>[268296.605568] br-lan: port 2(wlan0) entered blocking state
<6>[268296.611162] br-lan: port 2(wlan0) entered disabled state
<6>[268296.616932] device wlan0 entered promiscuous mode
<6>[268298.034899] br-lan: port 2(wlan0) entered blocking state
<6>[268298.040440] br-lan: port 2(wlan0) entered forwarding state
<6>[354690.783285] device wlan0 left promiscuous mode
<6>[354690.788153] br-lan: port 2(wlan0) entered disabled state
<6>[354695.110340] br-lan: port 2(wlan0) entered blocking state
<6>[354695.115924] br-lan: port 2(wlan0) entered disabled state
<6>[354695.121790] device wlan0 entered promiscuous mode
<6>[354696.496658] br-lan: port 2(wlan0) entered blocking state
<6>[354696.502208] br-lan: port 2(wlan0) entered forwarding state
<6>[441090.473174] device wlan0 left promiscuous mode
<6>[441090.478041] br-lan: port 2(wlan0) entered disabled state
<6>[441094.831626] br-lan: port 2(wlan0) entered blocking state
<6>[441094.837188] br-lan: port 2(wlan0) entered disabled state
<6>[441094.843056] device wlan0 entered promiscuous mode
<6>[441094.848063] br-lan: port 2(wlan0) entered blocking state
<6>[441094.853538] br-lan: port 2(wlan0) entered forwarding state
<6>[441094.860044] br-lan: port 2(wlan0) entered disabled state
<6>[441096.143580] br-lan: port 2(wlan0) entered blocking state
<6>[441096.149126] br-lan: port 2(wlan0) entered forwarding state
<6>[527490.172730] device wlan0 left promiscuous mode
<6>[527490.177478] br-lan: port 2(wlan0) entered disabled state
<6>[527494.541946] br-lan: port 2(wlan0) entered blocking state
<6>[527494.547517] br-lan: port 2(wlan0) entered disabled state
<6>[527494.553391] device wlan0 entered promiscuous mode
<6>[527495.938895] br-lan: port 2(wlan0) entered blocking state
<6>[527495.944394] br-lan: port 2(wlan0) entered forwarding state
<1>[592589.839671] CPU 0 Unable to handle kernel paging request at virtual address 000002c8, epc == 830af554, ra == 83082384
<4>[592589.850591] Oops[#1]:
<4>[592589.852986] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.108 #0
<4>[592589.859074] task: 803cb430 task.stack: 803c6000
<4>[592589.863748] $ 0 : 00000000 80410000 00000000 00000000
<4>[592589.869140] $ 4 : 00000000 838cbd80 00000000 00000000
<4>[592589.874531] $ 8 : 838cb1c8 82f18516 00000010 43420000
<4>[592589.879922] $12 : 087f0000 00000000 000a9a0e 00000004
<4>[592589.885312] $16 : 838cbd80 00000000 830ecbc0 830ecbc0
<4>[592589.890703] $20 : 83b61bf0 830f73ac 00000001 00000000
<4>[592589.896093] $24 : 00000010 801bcbe0
<4>[592589.901484] $28 : 803c6000 83807e18 830ede88 83082384
<4>[592589.906876] Hi : 005a1ac2
<4>[592589.909878] Lo : ef14c145
<4>[592589.912889] epc : 830af554 0x830af554 [mac80211@83080000+0x6a240]
<4>[592589.919330] ra : 83082384 0x83082384 [mac80211@83080000+0x6a240]
<4>[592589.925764] Status: 1100e403 KERNEL EXL IE
<4>[592589.930096] Cause : 00800008 (ExcCode 02)
<4>[592589.934243] BadVA : 000002c8
<4>[592589.937246] PrId : 00019655 (MIPS 24KEc)
<4>[592589.941392] Modules linked in: mt7603e mt76 mac80211 iptable_raw iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache compat act_connmark nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ifb
<4>[592590.013247] l2tp_ip l2tp_eth l2tp_netlink l2tp_core udp_tunnel leds_gpio gpio_button_hotplug
<4>[592590.021995] Process swapper (pid: 0, threadinfo=803c6000, task=803cb430, tls=00000000)
<4>[592590.030101] Stack : 83807e7c 0000008a 00000000 838cbd80 838cbd80 83082384 00000050 830ecbc0
<4>[592590.038670] 83b61bf0 830f73ac 830ed4e0 00000000 838cb180 00000000 00000000 830ecbc0
<4>[592590.047239] 83b61bf0 830f73ac 830ed4e0 00000001 830ecbc0 830adb78 00000cfc 0000033f
<4>[592590.055808] 8381b800 00000080 00000000 00000000 00060036 00000000 830ed4e0 83b61bf0
<4>[592590.064376] 00000004 00000003 00000006 830f73f0 83807ee0 80058f30 803dfc40 00000003
<4>[592590.072945] ...
<4>[592590.075510] Call Trace:
<4>[592590.075556] [<83082384>] 0x83082384 [mac80211@83080000+0x6a240]
<4>[592590.084214] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.090146] [<830f73ac>] 0x830f73ac [mt7603e@830f0000+0x87a0]
<4>[592590.096068] [<830adb78>] 0x830adb78 [mac80211@83080000+0x6a240]
<4>[592590.102173] [<830f73f0>] 0x830f73f0 [mt7603e@830f0000+0x87a0]
<4>[592590.108088] [<80058f30>] 0x80058f30
<4>[592590.111724] [<830b4d80>] 0x830b4d80 [mac80211@83080000+0x6a240]
<4>[592590.117809] [<80009e70>] 0x80009e70
<4>[592590.121449] [<830f7548>] 0x830f7548 [mt7603e@830f0000+0x87a0]
<4>[592590.127377] [<8002d078>] 0x8002d078
<4>[592590.130998] [<80009e70>] 0x80009e70
<4>[592590.134619] [<80351a20>] 0x80351a20
<4>[592590.138240] [<8005d978>] 0x8005d978
<4>[592590.141866] [<80058f30>] 0x80058f30
<4>[592590.145491] [<80009e70>] 0x80009e70
<4>[592590.149109]
<4>[592590.150701] Code: 27bdffe8 afbf0014 afb00010 <8c9002c8> 8caa00a4 1080001e 8e090438 8e030044 0123402a
<4>[592590.160690]
<4>[592590.162335] ---[ end trace 25bbd90279e222f9 ]---
===================================
https://code.fe80.eu/openwrt/openwrt/-/issues/2176
ubiquiti loco xw (AR9342 Rev.2) stops receiving on wireless
2019-09-10T10:45:39Z
aparcar
ubiquiti loco xw (AR9342 Rev.2) stops receiving on wireless
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=2176
This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the A...
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=2176
This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to reproduce, but it hits us reliable every couple of hours, sometimes days, running any version of OpenWrt up to todays master branch. It just happened again and this time I decided to check if the bug is actually listed on FS – in addition to creating the usual cron-job executing `iw dev wlan0 scan` every minute. There is even a watchdog in the community libremesh repository designed to catch exactly this bug:
https://github.com/libremesh/lime-packages/blob/master/packages/cotonete/Makefile#L21
So to run into it, here we got 2 ubiquiti nanobeam m5 devices running OpenWrt ar71xx/generic loco-m-xw pointing at each other over a distance of roughly 2km. This link is acceptable, but not perfect and slightly asymmetric.
Device A (worse RX SNR):
Station f0:9f:c2:xx:xx:7a (on wlan0-mesh)
inactive time: 0 ms
rx bytes: 1433997029
rx packets: 8589913
tx bytes: 23160025785
tx packets: 15667682
tx retries: 677924
tx failed: 0
rx drop misc: 30076
signal: -76 [-79, -79] dBm
signal avg: -74 [-77, -77] dBm
Toffset: 4887897799 us
tx bitrate: 43.3 MBit/s MCS 10 short GI
rx bitrate: 43.3 MBit/s MCS 4 short GI
expected throughput: 24.536Mbps
mesh llid: 0
mesh plid: 0
mesh plink: ESTAB
mesh local PS mode: ACTIVE
mesh peer PS mode: ACTIVE
mesh non-peer PS mode: ACTIVE
authorized: yes
authenticated: yes
associated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
DTIM period: 2
beacon interval:100
connected time: 18117 seconds
Device B (better RX SNR)
Station fc:ec:da:xx:xx:8c (on wlan0-mesh)
inactive time: 20 ms
rx bytes: 23442553203
rx packets: 16047526
tx bytes: 1274688573
tx packets: 8251479
tx retries: 1337700
tx failed: 2932
rx drop misc: 45195
signal: -72 [-79, -73] dBm
signal avg: -71 [-78, -73] dBm
Toffset: 18446744068821653812 us
tx bitrate: 57.8 MBit/s MCS 11 short GI
rx bitrate: 43.3 MBit/s MCS 10 short GI
last ack signal:24 dBm
expected throughput: 24.536Mbps
mesh llid: 0
mesh plid: 0
mesh plink: ESTAB
mesh local PS mode: ACTIVE
mesh peer PS mode: ACTIVE
mesh non-peer PS mode: ACTIVE
authorized: yes
authenticated: yes
associated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
DTIM period: 2
beacon interval:100
connected time: 18179 seconds
Now it so happens that device A (and always only device A!) becomes deaf after some hours of mostly sending lots of traffic to device B. It will continue to send beacons, but loose all associations. device B will keep trying setting up a link, but it keeps ending up in ‘BLOCKED’ state and dumps using a monitor mode interface show that device A simply doesn’t react at all to any of the frames send by device B. A simple `iw dev wlan0 scan` on device A (which doesn’t give any results) fixes the problem.
The channel seems rather unused otherwise and signal quality only varies by weather conditions. Interestingly this seems to happen on non-DFS channels only. And it happens on Ad-Hoc mode (unencrypted, never tried encrypted) and 802.11s (open ie. setup via `iw` tool as well as with SAE ie. running `wpa_supplicant`) equally. It doesn’t happen on all nodes, but only on those with rather bad signal or at least one far-off neighbor.
Maybe related to
FS#1246
I saw this occuring on ubnt nanostation loco m5 XW as well as on all nanobeam m5 variants (which is supposedly compatible with the loco-m-xw image).
ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
WiFi EEPROM of the devices:
*
00001000 02 02 F0 9F C2 XX XX XX 00 30 3a 31 35 3a 36 64 |.....XXX.0:15:6d|
00001010 3a 64 64 3a 64 65 3a 61 64 00 00 00 00 00 1f 00 |:dd:de:ad.......|
00001020 33 01 00 00 00 00 04 00 00 00 2d 04 03 00 08 ff |3.........-.....|
00001030 20 01 00 00 00 20 02 00 00 cc cc 0c 00 50 01 50 | .... .......P.P|
00001040 01 50 01 00 00 00 00 00 00 21 00 a4 00 00 00 00 |.P.......!......|
00001050 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001060 0e 0e 03 00 2c e2 00 02 0e 1c e0 e0 00 0c e0 e0 |....,...........|
00001070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001080 00 00 00 00 00 00 00 00 00 00 70 89 ac 00 00 00 |..........p.....|
00001090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000010c0 00 00 00 70 ac 70 89 ac 70 89 ac 70 89 ac 22 22 |...p.p..p..p..""|
000010d0 22 22 22 22 22 22 22 22 20 1c 22 22 20 1c 22 22 |"""""""" ."" .""|
000010e0 20 1c 24 24 20 18 16 14 20 16 14 12 20 20 1c 14 | .$$ ... ... ..|
000010f0 24 24 20 18 16 14 20 16 14 12 20 20 1c 14 24 24 |$$ ... ... ..$$|
00001100 20 18 16 14 20 16 14 12 20 20 1c 14 22 22 1e 16 | ... ... ..""..|
00001110 14 12 1e 14 12 10 20 20 1c 14 22 22 1e 16 14 12 |...... ..""....|
00001120 1e 14 12 10 20 20 1c 14 22 22 1e 16 14 12 1e 14 |.... ..""......|
00001130 12 10 20 20 1c 14 11 12 15 17 41 42 45 47 31 32 |.. ......ABEG12|
00001140 35 37 70 75 ac b8 70 75 ac b8 70 75 ac b8 70 75 |57pu..pu..pu..pu|
00001150 ac b8 70 75 ac b8 70 75 ac b8 70 75 ac b8 70 75 |..pu..pu..pu..pu|
*
00001170 ac b8 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c |..<|<|<|<|<|<|<||
00001180 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c |<|<|<|<|<|<|<|<||
*
000011a0 3c 7c 10 01 00 00 22 22 02 00 00 00 00 00 00 00 |<|....""........|
000011b0 00 00 00 00 00 00 44 00 00 00 00 00 00 ff 00 00 |......D.........|
000011c0 00 00 00 00 00 00 00 00 00 00 00 00 ff 0e 0e 03 |................|
000011d0 00 2d e2 00 02 0e 1c 00 00 00 00 00 00 00 00 00 |.-..............|
000011e0 00 00 00 00 00 00 00 00 00 44 44 00 00 00 00 00 |.........DD.....|
000011f0 00 00 00 00 00 00 00 4c 58 68 8c a4 b4 bd cd d9 |.......LXh......|
00001200 00 89 00 00 00 dc 00 89 00 00 00 e0 00 8a 00 00 |................|
00001210 00 e2 00 8b 00 00 00 de 00 8b 00 00 00 de 00 8b |................|
00001220 00 00 00 dc 00 89 00 00 00 da 00 8b 00 00 00 e0 |................|
00001230 00 89 00 00 00 e4 00 8a 00 00 00 e7 00 8b 00 00 |................|
00001240 00 e6 00 8b 00 00 00 e2 00 8c 00 00 00 e1 00 8c |................|
00001250 00 00 00 df 00 8b 00 00 00 dd 00 8b 00 00 00 00 |................|
00001260 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00001280 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4c |...............L|
00001290 54 68 78 8c a0 b4 c5 4c 54 68 78 8c a0 b4 c5 4c |Thx....LThx....L|
000012a0 54 68 78 8c a0 b4 c5 26 20 1e 1c 26 20 1e 1c 26 |Thx....& ..& ..&|
000012b0 20 1e 1c 26 20 1e 1c 26 20 1e 1c 26 20 1e 1c 26 | ..& ..& ..& ..&|
000012c0 20 1e 1c 26 20 1e 1c 26 22 20 1e 1c 1a 20 1e 1c | ..& ..&" ... ..|
000012d0 1a 00 00 00 00 26 22 20 1e 1c 1a 20 1e 1c 1a 00 |.....&" ... ....|
000012e0 00 00 00 26 22 20 1e 1c 1a 20 1e 1c 1a 00 00 00 |...&" ... ......|
000012f0 00 26 22 20 1e 1c 1a 20 1e 1c 1a 00 00 00 00 26 |.&" ... .......&|
00001300 22 20 1e 1c 1a 20 1e 1c 1a 00 00 00 00 26 22 20 |" ... .......&" |
00001310 1e 1c 1a 20 1e 1c 1a 00 00 00 00 26 22 20 1e 1c |... .......&" ..|
00001320 1a 20 1e 1c 1a 00 00 00 00 26 22 20 1e 1c 1a 20 |. .......&" ... |
00001330 1e 1c 1a 00 00 00 00 26 22 20 1e 1c 1a 20 1e 1c |.......&" ... ..|
00001340 1a 00 00 00 00 26 22 20 1e 1c 1a 20 1e 1c 1a 00 |.....&" ... ....|
00001350 00 00 00 26 22 20 1e 1c 1a 20 1e 1c 1a 00 00 00 |...&" ... ......|
00001360 00 26 22 20 1e 1c 1a 20 1e 1c 1a 00 00 00 00 26 |.&" ... .......&|
00001370 22 20 1e 1c 1a 20 1e 1c 1a 00 00 00 00 26 22 20 |" ... .......&" |
00001380 1e 1c 1a 20 1e 1c 1a 00 00 00 00 26 22 20 1e 1c |... .......&" ..|
00001390 1a 20 1e 1c 1a 00 00 00 00 26 22 20 1e 1c 1a 20 |. .......&" ... |
000013a0 1e 1c 1a 00 00 00 00 10 16 18 40 46 48 30 36 38 |..........@FH068|
000013b0 4c 54 68 78 8c a0 b9 cd 4c 54 68 78 8c a0 b9 cd |LThx....LThx....|
*
000013f0 4c 54 68 78 8c a0 b9 cd 3c 7c 3c 7c 3c 7c 3c 7c |LThx....<|<|<|<||
00001400 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c 3c 7c |<|<|<|<|<|<|<|<||
*
00001440 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
https://code.fe80.eu/openwrt/openwrt/-/issues/1958
uqmi: unicode characters in SMS confuse uqmi
2019-09-10T10:45:05Z
aparcar
uqmi: unicode characters in SMS confuse uqmi
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=1958
When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=1958
When using uqmi –get-message the message ends up truncated in case it contains unicode characters like german umlauts.
https://code.fe80.eu/openwrt/openwrt/-/issues/1837
Kernel oops when using wireguard and mangle/fwmark
2019-09-10T10:44:23Z
aparcar
Kernel oops when using wireguard and mangle/fwmark
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=1837
On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Et...
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=1837
On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.
Fri Sep 7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep 7 18:13:18 2018 kern.err kernel: [24612.664907] 1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep 7 18:13:18 2018 kern.err kernel: [24612.665571] (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668145] <IRQ>
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668372] 0xffffffff8159c6d0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668662] 0xffffffff815a0000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668950] ? 0xffffffff810418d0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.669251] 0xffffffff815a0060
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.669544] 0xffffffff81041924
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.669836] 0xffffffff810c22e3
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.670128] 0xffffffff810c176f
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.670421] ? 0xffffffff8109fe35
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.670720] ? 0xffffffff810a0062
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671020] 0xffffffff810c432a
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671309] 0xffffffff810d0f5e
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671599] 0xffffffff810c4c4f
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671892] 0xffffffff810c4df6
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672182] 0xffffffff81602392
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672473] 0xffffffff81601a61
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672760] </IRQ>
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.676484] 0xffffffff814e7a0a
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.676773] 0xffffffff814e7d89
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.677065] 0xffffffff81532536
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.677359] 0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.677845] 0xffffffff814e2966
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.678137] 0xffffffff814ed868
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.678430] ? 0xffffffff814ebed0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.678725] 0xffffffff814ed897
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.679014] 0xffffffff8152b6bb
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.679309] 0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.679786] 0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.680256] ? 0xffffffff811038aa
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.680555] ? 0xffffffff810c5454
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.680854] 0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.681321] 0xffffffff81091cf4
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.681613] 0xffffffff8109204b
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.681903] 0xffffffff81096d42
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.682191] ? 0xffffffff81091e40
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.682487] ? 0xffffffff81096c30
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.682788] 0xffffffff816001ef
Bootlog:
[ 0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: No reference (HPET/PMTIMER) available
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 write-through
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[ 0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[ 0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[ 0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[ 0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[ 0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[ 0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007F390F80 000040
[ 0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[ 0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007f6effff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f1b2fff]
[ 0.000000] node 0: [mem 0x000000007f410000-0x000000007f58efff]
[ 0.000000] node 0: [mem 0x000000007f6e6000-0x000000007f6effff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[ 0.000000] On node 0 totalpages: 520921
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8092 pages used for memmap
[ 0.000000] DMA32 zone: 516924 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 512744
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.040000] tsc: Unable to calibrate against PIT
[ 0.040000] tsc: using HPET reference calibration
[ 0.040000] tsc: Detected 1595.996 MHz processor
[ 0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[ 0.040000] pid_max: default: 32768 minimum: 301
[ 0.040000] ACPI: Core revision 20170728
[ 0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.071425] Disabled fast string operations
[ 0.071787] mce: CPU supports 5 MCE banks
[ 0.072125] process: using mwait in idle threads
[ 0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.073530] Freeing SMP alternatives memory: 28K
[ 0.080265] smpboot: Max logical packages: 2
[ 0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[ 0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[ 0.190000] ... version: 3
[ 0.190000] ... bit width: 40
[ 0.190000] ... generic registers: 2
[ 0.190000] ... value mask: 000000ffffffffff
[ 0.190000] ... max period: 000000007fffffff
[ 0.190000] ... fixed-purpose events: 3
[ 0.190000] ... event mask: 0000000700000003
[ 0.190000] Hierarchical SRCU implementation.
[ 0.190000] smp: Bringing up secondary CPUs ...
[ 0.190000] x86: Booting SMP configuration:
[ 0.190000] .... node #0, CPUs: #1
[ 0.010000] Disabled fast string operations
[ 0.190000] #2
[ 0.010000] Disabled fast string operations
[ 0.190386] #3
[ 0.010000] Disabled fast string operations
[ 0.193013] smp: Brought up 1 node, 4 CPUs
[ 0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[ 0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.197097] NET: Registered protocol family 16
[ 0.198390] cpuidle: using governor ladder
[ 0.198390] ACPI: bus type PCI registered
[ 0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200004] PCI: Using configuration type 1 for base access
[ 0.217580] ACPI: Added _OSI(Module Device)
[ 0.217940] ACPI: Added _OSI(Processor Device)
[ 0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.219086] ACPI: EC: EC started
[ 0.219370] ACPI: EC: interrupt blocked
[ 0.222270] ACPI: \: Used as first EC
[ 0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.242268] ACPI: Dynamic OEM Table Load:
[ 0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.246636] ACPI: Dynamic OEM Table Load:
[ 0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.254189] ACPI: Dynamic OEM Table Load:
[ 0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.257695] ACPI: Dynamic OEM Table Load:
[ 0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.264783] ACPI: Interpreter enabled
[ 0.265199] ACPI: (supports S0 S5)
[ 0.265579] ACPI: Using IOAPIC for interrupt routing
[ 0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270580] ACPI: GPE 0x02 active on init
[ 0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[ 0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.306311] PCI host bridge to bus 0000:00
[ 0.306311] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.306311] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[ 0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[ 0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[ 0.310006] pci 0000:00:02.0: reg 0x14: [io 0xf100-0xf107]
[ 0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[ 0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.317706] pci 0000:00:1d.0: reg 0x20: [io 0xf0a0-0xf0bf]
[ 0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.318128] pci 0000:00:1d.1: reg 0x20: [io 0xf080-0xf09f]
[ 0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.318515] pci 0000:00:1d.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.318938] pci 0000:00:1d.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[ 0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.323112] pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7]
[ 0.323112] pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3]
[ 0.323112] pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7]
[ 0.323112] pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3]
[ 0.323112] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf02f]
[ 0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[ 0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.323324] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[ 0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[ 0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[ 0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[ 0.324284] pci 0000:02:00.0: supports D1
[ 0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.330068] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.330469] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[ 0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[ 0.333006] pci 0000:03:00.0: supports D1 D2
[ 0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.333620] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.333630] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[ 0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[ 0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.335350] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.336039] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.336044] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.336049] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.336053] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.336057] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[ 0.336062] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.336066] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[ 0.336070] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.336130] pci_bus 0000:00: on NUMA node 0
[ 0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.346039] ACPI: EC: interrupt unblocked
[ 0.346039] ACPI: EC: event unblocked
[ 0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.348684] SCSI subsystem initialized
[ 0.349211] libata version 3.00 loaded.
[ 0.349211] ACPI: bus type USB registered
[ 0.349789] usbcore: registered new interface driver usbfs
[ 0.350039] usbcore: registered new interface driver hub
[ 0.350749] usbcore: registered new device driver usb
[ 0.351384] PCI: Using ACPI for IRQ routing
[ 0.351384] PCI: pci_cache_line_size set to 64 bytes
[ 0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[ 0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[ 0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[ 0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.355766] clocksource: Switched to clocksource hpet
[ 0.356312] pnp: PnP ACPI init
[ 0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.357767] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.358214] system 00:01: [io 0x1000-0x1003] has been reserved
[ 0.358667] system 00:01: [io 0x1010-0x101f] has been reserved
[ 0.359103] system 00:01: [io 0xffff] has been reserved
[ 0.359513] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.359952] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.359952] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] system 00:02: [io 0x06a0-0x06af] has been reserved
[ 0.359952] system 00:02: [io 0x06b0-0x06ff] has been reserved
[ 0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.359952] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.359952] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.359952] system 00:05: [io 0x0500-0x053f] has been reserved
[ 0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] system 00:06: [io 0x025d] has been reserved
[ 0.359952] system 00:06: [io 0x025c] has been reserved
[ 0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[ 0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[ 0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[ 0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.363524] system 00:09: [io 0x0240-0x0259] has been reserved
[ 0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[ 0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.368805] system 00:0c: [io 0x0400-0x047f] has been reserved
[ 0.369252] system 00:0c: [io 0x0500-0x053f] has been reserved
[ 0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372179] pnp: PnP ACPI: found 13 devices
[ 0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.381648] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.381681] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.381726] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[ 0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.384646] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.385095] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.385545] pci 0000:00:1c.3: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.386387] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.386830] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.387314] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.388285] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.388736] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.389226] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.390233] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.390690] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.391180] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.392157] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.392608] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.393098] pci 0000:00:1c.3: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.394103] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.394108] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[ 0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[ 0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[ 0.394140] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[ 0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.394153] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.394166] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.394179] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 0.394193] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.394197] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[ 0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[ 0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[ 0.394458] NET: Registered protocol family 2
[ 0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.398146] NET: Registered protocol family 1
[ 0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.401674] PCI: CLS 64 bytes, default 64
[ 0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.411230] io scheduler noop registered
[ 0.411556] io scheduler deadline registered (default)
[ 0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[ 0.413720] hv_vmbus: registering driver hv_pci
[ 0.414138] hv_vmbus: registering driver hyperv_fb
[ 0.414552] intel_idle: MWAIT substates: 0x3020220
[ 0.414554] intel_idle: v0.4.1 model 0x36
[ 0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.415333] ACPI: AC Adapter [AC0] (on-line)
[ 0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.470262] ACPI: Lid Switch [LID]
[ 0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.471442] ACPI: Sleep Button [SLPB]
[ 0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.472528] ACPI: Power Button [PWRF]
[ 0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.476418] ACPI: Thermal Zone [THRM] (63 C)
[ 0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.480090] Non-volatile memory driver v1.3
[ 0.483829] loop: module loaded
[ 0.484309] Guest personality initialized and is inactive
[ 0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[ 0.485403] Initialized host personality
[ 0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[ 0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[ 0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[ 0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[ 0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[ 0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[ 0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[ 0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.500186] hv_vmbus: registering driver hv_storvsc
[ 0.500738] ahci 0000:00:1f.2: version 3.0
[ 0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 0.504418] scsi host0: ahci
[ 0.505055] scsi host1: ahci
[ 0.505678] scsi host2: ahci
[ 0.506330] scsi host3: ahci
[ 0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[ 0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[ 0.507918] ata3: DUMMY
[ 0.508159] ata4: DUMMY
[ 0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[ 0.509469] hv_vmbus: registering driver hv_netvsc
[ 0.509854] Fusion MPT base driver 3.04.20
[ 0.510250] Copyright (c) 1999-2008 LSI Corporation
[ 0.510709] Fusion MPT SPI Host driver 3.04.20
[ 0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.511607] ehci-pci: EHCI PCI platform driver
[ 0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.513793] ehci-pci 0000:00:1d.7: debug port 1
[ 0.514113] ACPI: Battery Slot [BAT0] (battery present)
[ 0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[ 0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.541063] hub 1-0:1.0: USB hub found
[ 0.541418] hub 1-0:1.0: 8 ports detected
[ 0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.543221] ohci-pci: OHCI PCI platform driver
[ 0.543620] ohci-platform: OHCI generic platform driver
[ 0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[ 0.547982] hub 2-0:1.0: USB hub found
[ 0.548435] hub 2-0:1.0: 2 ports detected
[ 0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.551899] hub 3-0:1.0: USB hub found
[ 0.552349] hub 3-0:1.0: 2 ports detected
[ 0.553301] usbcore: registered new interface driver usb-storage
[ 0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.556563] i8042: Detected active multiplexing controller, rev 1.1
[ 0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.561255] hv_vmbus: registering driver hyperv_keyboard
[ 0.561774] rtc_cmos 00:03: RTC can wake from S4
[ 0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.564393] sdhci: Secure Digital Host Controller Interface driver
[ 0.564865] sdhci: Copyright(c) Pierre Ossman
[ 0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.566486] hv_vmbus: registering driver hid_hyperv
[ 0.566915] usbcore: registered new interface driver usbhid
[ 0.567337] usbhid: USB HID core driver
[ 0.567684] hv_utils: Registering HyperV Utility Driver
[ 0.568088] hv_vmbus: registering driver hv_util
[ 0.568454] hv_vmbus: registering driver hv_balloon
[ 0.569382] NET: Registered protocol family 10
[ 0.570351] Segment Routing with IPv6
[ 0.570715] NET: Registered protocol family 17
[ 0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.571999] 8021q: 802.1Q VLAN Support v1.8
[ 0.572509] NET: Registered protocol family 40
[ 0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[ 0.574234] microcode: Microcode Update Driver: v2.2.
[ 0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[ 0.575503] registered taskstats version 1
[ 0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[ 0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[ 0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.837583] ata1.00: configured for UDMA/133
[ 0.838642] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[ 0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.842433] sd 0:0:0:0: [sda] Write Protect is off
[ 0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.877982] sda: sda1 sda2
[ 0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[ 1.194364] Freeing unused kernel memory: 1052K
[ 1.230632] Write protecting the kernel read-only data: 12288k
[ 1.235448] Freeing unused kernel memory: 2024K
[ 1.252890] Freeing unused kernel memory: 736K
[ 1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[ 1.566812] init: Console is alive
[ 1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.821964] pps_core: LinuxPPS API ver. 1 registered
[ 1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.823647] PTP clock support registered
[ 1.824343] Button Hotplug driver version 0.4.1
[ 1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 1.830753] init: - preinit -
[ 1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[ 2.490506] clocksource: Switched to clocksource tsc
[ 2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 2.692832] scsi host4: usb-storage 1-7:1.0
[ 3.754161] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.433172] urandom_read: 5 callbacks suppressed
[ 5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[ 5.751832] mount_root: switching to f2fs overlay
[ 5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 5.839672] urandom-seed: Seeding with /etc/urandom.seed
[ 5.914891] procd: - early -
[ 6.557234] procd: - ubus -
[ 6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[ 6.610617] procd: - init -
[ 6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.954303] tun: Universal TUN/TAP device driver, 1.6
[ 6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.426558] Netfilter messages via NETLINK v0.30.
[ 7.428839] ip_set: protocol 6
[ 7.450984] i2c /dev entries driver
[ 7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[ 8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[ 8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.174092] xt_time: kernel timezone is -0000
[ 8.411155] Intel(R) Wireless WiFi driver for Linux
[ 8.411610] Copyright(c) 2003- 2015 Intel Corporation
[ 8.445655] PPP generic driver version 2.4.2
[ 8.447497] NET: Registered protocol family 24
[ 8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[ 8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[ 8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[ 8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[ 8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 11.792405] r8169 0000:03:00.0 eth0: link down
[ 11.792453] r8169 0000:03:00.0 eth0: link down
[ 11.903937] random: fast init done
[ 13.415479] r8169 0000:03:00.0 eth0: link up
[ 30.131354] random: crng init done
https://code.fe80.eu/openwrt/openwrt/-/issues/1836
Kernel oops when using wireguard and mangle/fwmark
2019-09-10T10:44:15Z
aparcar
Kernel oops when using wireguard and mangle/fwmark
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=1836
On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Et...
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=1836
On OpenWrt 18.06.1 x86/64 when using mwan3 with two wireguard interfaces in fail-over configuration, kernel crashes.
The machine got a single Ethernet interface being the head-unit connected to a VLAN switch.
Fri Sep 7 18:13:18 2018 kern.err kernel: [24612.664463] INFO: rcu_sched self-detected stall on CPU
Fri Sep 7 18:13:18 2018 kern.err kernel: [24612.664907] 1-...: (5999 ticks this GP) idle=9ee/140000000000001/0 softirq=961867/961867 fqs=2711
Fri Sep 7 18:13:18 2018 kern.err kernel: [24612.665571] (t=6000 jiffies g=358062 c=358061 q=4475)
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.665986] NMI backtrace for cpu 1
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.666301] CPU: 1 PID: 14102 Comm: kworker/1:0 Not tainted 4.14.63 #0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.666775] Hardware name: XXXXXXXXXX
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.667240] Workqueue: wg-crypt-XXXXX 0xffffffffa01dbab0 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.667891] Call Trace:
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668145] <IRQ>
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668372] 0xffffffff8159c6d0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668662] 0xffffffff815a0000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.668950] ? 0xffffffff810418d0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.669251] 0xffffffff815a0060
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.669544] 0xffffffff81041924
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.669836] 0xffffffff810c22e3
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.670128] 0xffffffff810c176f
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.670421] ? 0xffffffff8109fe35
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.670720] ? 0xffffffff810a0062
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671020] 0xffffffff810c432a
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671309] 0xffffffff810d0f5e
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671599] 0xffffffff810c4c4f
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.671892] 0xffffffff810c4df6
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672182] 0xffffffff81602392
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672473] 0xffffffff81601a61
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672760] </IRQ>
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.672994] RIP: 0010:0xffffffff814e7682
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.673327] RSP: 0018:ffffc90000cb3a30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.673912] RAX: 00000000000001f8 RBX: ffffc90000cb3af8 RCX: 0000000000000000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.674426] RDX: ffff880077923e00 RSI: 00000000deb48eb9 RDI: ffff88007aa28e68
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.674944] RBP: ffffc90000cb3a80 R08: 0000000000000000 R09: 0000000000000000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.675456] R10: ffff88007aa28e00 R11: 0000000000000001 R12: ffff880077923e00
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.675966] R13: ffffc90000cb3a90 R14: ffff8800786e3a00 R15: ffff88007a360000
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.676484] 0xffffffff814e7a0a
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.676773] 0xffffffff814e7d89
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.677065] 0xffffffff81532536
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.677359] 0xffffffffa01800a7 [iptable_mangle@ffffffffa0180000+0x3000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.677845] 0xffffffff814e2966
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.678137] 0xffffffff814ed868
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.678430] ? 0xffffffff814ebed0
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.678725] 0xffffffff814ed897
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.679014] 0xffffffff8152b6bb
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.679309] 0xffffffffa002145e [udp_tunnel@ffffffffa0021000+0x3000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.679786] 0xffffffffa01ddf81 [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.680256] ? 0xffffffff811038aa
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.680555] ? 0xffffffff810c5454
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.680854] 0xffffffffa01dbb5a [wireguard@ffffffffa01d8000+0x2d000]
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.681321] 0xffffffff81091cf4
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.681613] 0xffffffff8109204b
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.681903] 0xffffffff81096d42
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.682191] ? 0xffffffff81091e40
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.682487] ? 0xffffffff81096c30
Fri Sep 7 18:13:18 2018 kern.warn kernel: [24612.682788] 0xffffffff816001ef
Bootlog:
[ 0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Wed Aug 15 20:42:39 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f1b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f1b3000-0x000000007f1fafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f1fb000-0x000000007f314fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f315000-0x000000007f324fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f325000-0x000000007f33bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f344000-0x000000007f358fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f359000-0x000000007f359fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f35a000-0x000000007f377fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f378000-0x000000007f37bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f37c000-0x000000007f38afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f38b000-0x000000007f39bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f39c000-0x000000007f39dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f39e000-0x000000007f39efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f39f000-0x000000007f3ccfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f3cd000-0x000000007f40ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f410000-0x000000007f58efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f6e5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f6e6000-0x000000007f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Medion E1230/E1230, BIOS 208 02/10/2012
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: No reference (HPET/PMTIMER) available
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 write-through
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffffffffff400d10]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[ 0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[ 0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[ 0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[ 0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[ 0.000000] BRK [0x01e0c000, 0x01e0cfff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MEDION)
[ 0.000000] ACPI: XSDT 0x000000007F315070 00005C (v01 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007F3236E8 0000F4 (v04 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007F315158 00E58C (v02 MEDION MEDIONAG 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007F390F80 000040
[ 0.000000] ACPI: APIC 0x000000007F3237E0 000072 (v03 MEDION MEDIONAG 00000001 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x000000007F323858 000176 (v01 MEDION MEDIONAG 00000001 MSFT 00000001)
[ 0.000000] ACPI: ECDT 0x000000007F3239D0 0000C1 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x000000007F323A98 00003C (v01 MEDION MEDIONAG 00000001 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007F323AD8 000038 (v01 MEDION MEDIONAG 00000001 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007F323B10 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007f6effff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f1b2fff]
[ 0.000000] node 0: [mem 0x000000007f410000-0x000000007f58efff]
[ 0.000000] node 0: [mem 0x000000007f6e6000-0x000000007f6effff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[ 0.000000] On node 0 totalpages: 520921
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8092 pages used for memmap
[ 0.000000] DMA32 zone: 516924 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from 0xffffffff81cb0b09 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff88007ee00000 s132056 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s132056 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 512744
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=cbad8a62-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2032612K/2083684K available (8200K kernel code, 527K rwdata, 1312K rodata, 1052K init, 420K bss, 51072K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.040000] tsc: Unable to calibrate against PIT
[ 0.040000] tsc: using HPET reference calibration
[ 0.040000] tsc: Detected 1595.996 MHz processor
[ 0.040000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=15959960)
[ 0.040000] pid_max: default: 32768 minimum: 301
[ 0.040000] ACPI: Core revision 20170728
[ 0.068326] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.070105] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.070601] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.071425] Disabled fast string operations
[ 0.071787] mce: CPU supports 5 MCE banks
[ 0.072125] process: using mwait in idle threads
[ 0.072500] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.072914] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.073530] Freeing SMP alternatives memory: 28K
[ 0.080265] smpboot: Max logical packages: 2
[ 0.081106] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.190000] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz (family: 0x6, model: 0x36, stepping: 0x1)
[ 0.190000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[ 0.190000] ... version: 3
[ 0.190000] ... bit width: 40
[ 0.190000] ... generic registers: 2
[ 0.190000] ... value mask: 000000ffffffffff
[ 0.190000] ... max period: 000000007fffffff
[ 0.190000] ... fixed-purpose events: 3
[ 0.190000] ... event mask: 0000000700000003
[ 0.190000] Hierarchical SRCU implementation.
[ 0.190000] smp: Bringing up secondary CPUs ...
[ 0.190000] x86: Booting SMP configuration:
[ 0.190000] .... node #0, CPUs: #1
[ 0.010000] Disabled fast string operations
[ 0.190000] #2
[ 0.010000] Disabled fast string operations
[ 0.190386] #3
[ 0.010000] Disabled fast string operations
[ 0.193013] smp: Brought up 1 node, 4 CPUs
[ 0.193365] smpboot: Total of 4 processors activated (12767.96 BogoMIPS)
[ 0.195434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.196180] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.197097] NET: Registered protocol family 16
[ 0.198390] cpuidle: using governor ladder
[ 0.198390] ACPI: bus type PCI registered
[ 0.198390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200004] PCI: Using configuration type 1 for base access
[ 0.217580] ACPI: Added _OSI(Module Device)
[ 0.217940] ACPI: Added _OSI(Processor Device)
[ 0.218293] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.218673] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.219086] ACPI: EC: EC started
[ 0.219370] ACPI: EC: interrupt blocked
[ 0.222270] ACPI: \: Used as first EC
[ 0.222591] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.223021] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.223763] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240673] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.242268] ACPI: Dynamic OEM Table Load:
[ 0.242613] ACPI: SSDT 0xFFFF88007BD5D800 0002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.246636] ACPI: Dynamic OEM Table Load:
[ 0.247070] ACPI: SSDT 0xFFFF88007BC81000 0006DB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.254189] ACPI: Dynamic OEM Table Load:
[ 0.256660] ACPI: SSDT 0xFFFF88007C6CB000 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.257695] ACPI: Dynamic OEM Table Load:
[ 0.260047] ACPI: SSDT 0xFFFF88007C7DE540 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.264783] ACPI: Interpreter enabled
[ 0.265199] ACPI: (supports S0 S5)
[ 0.265579] ACPI: Using IOAPIC for interrupt routing
[ 0.268058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270580] ACPI: GPE 0x02 active on init
[ 0.272964] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.305839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.305839] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[ 0.305839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.306311] PCI host bridge to bus 0000:00
[ 0.306311] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.306311] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.306311] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.306721] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[ 0.310006] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[ 0.310006] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[ 0.310006] pci 0000:00:02.0: reg 0x14: [io 0xf100-0xf107]
[ 0.315634] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.315634] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[ 0.315634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.315960] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.315960] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.316454] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.316454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.316867] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.316867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.317285] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.317285] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.317706] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.317706] pci 0000:00:1d.0: reg 0x20: [io 0xf0a0-0xf0bf]
[ 0.318128] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.318128] pci 0000:00:1d.1: reg 0x20: [io 0xf080-0xf09f]
[ 0.318515] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.318515] pci 0000:00:1d.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.318938] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.318938] pci 0000:00:1d.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.319336] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.319336] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[ 0.319336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.320072] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.320513] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.323112] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.323112] pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7]
[ 0.323112] pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3]
[ 0.323112] pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7]
[ 0.323112] pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3]
[ 0.323112] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf02f]
[ 0.323112] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[ 0.323112] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.323324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.323324] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.324155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.324284] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330
[ 0.324284] pci 0000:02:00.0: reg 0x10: [mem 0xdfe00000-0xdfe0ffff 64bit]
[ 0.324284] pci 0000:02:00.0: reg 0x18: [mem 0xdfe11000-0xdfe11fff 64bit]
[ 0.324284] pci 0000:02:00.0: reg 0x20: [mem 0xdfe10000-0xdfe10fff 64bit]
[ 0.324284] pci 0000:02:00.0: supports D1
[ 0.324284] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.324922] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.330068] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.330359] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.330469] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.330614] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[ 0.332600] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[ 0.333006] pci 0000:03:00.0: supports D1 D2
[ 0.333011] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.333620] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.333630] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.333927] pci 0000:04:00.0: [8086:0896] type 00 class 0x028000
[ 0.334057] pci 0000:04:00.0: reg 0x10: [mem 0xdfc00000-0xdfc01fff 64bit]
[ 0.334763] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.334942] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.335350] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.335528] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.336039] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.336044] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.336049] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.336053] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.336057] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[ 0.336062] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.336066] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[ 0.336070] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.336130] pci_bus 0000:00: on NUMA node 0
[ 0.337515] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.338262] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.338262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.338262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.340011] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.340011] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.340011] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.340011] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.346039] ACPI: EC: interrupt unblocked
[ 0.346039] ACPI: EC: event unblocked
[ 0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.346039] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.348684] SCSI subsystem initialized
[ 0.349211] libata version 3.00 loaded.
[ 0.349211] ACPI: bus type USB registered
[ 0.349789] usbcore: registered new interface driver usbfs
[ 0.350039] usbcore: registered new interface driver hub
[ 0.350749] usbcore: registered new device driver usb
[ 0.351384] PCI: Using ACPI for IRQ routing
[ 0.351384] PCI: pci_cache_line_size set to 64 bytes
[ 0.351384] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.351384] e820: reserve RAM buffer [mem 0x7f1b3000-0x7fffffff]
[ 0.351384] e820: reserve RAM buffer [mem 0x7f58f000-0x7fffffff]
[ 0.351384] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[ 0.352856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.353253] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.355766] clocksource: Switched to clocksource hpet
[ 0.356312] pnp: PnP ACPI init
[ 0.357109] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.357615] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.357767] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.358214] system 00:01: [io 0x1000-0x1003] has been reserved
[ 0.358667] system 00:01: [io 0x1010-0x101f] has been reserved
[ 0.359103] system 00:01: [io 0xffff] has been reserved
[ 0.359513] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.359952] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.359952] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.359952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] system 00:02: [io 0x06a0-0x06af] has been reserved
[ 0.359952] system 00:02: [io 0x06b0-0x06ff] has been reserved
[ 0.359952] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.359952] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.359952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.359952] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.359952] system 00:05: [io 0x0500-0x053f] has been reserved
[ 0.359952] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359952] system 00:06: [io 0x025d] has been reserved
[ 0.359952] system 00:06: [io 0x025c] has been reserved
[ 0.359952] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.360167] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.360645] system 00:06: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.361121] system 00:06: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.361592] system 00:06: [mem 0xfec20000-0xfec27fff] has been reserved
[ 0.362072] system 00:06: [mem 0xfec28000-0xfec2ffff] has been reserved
[ 0.362553] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.363064] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.363263] pnp 00:07: Plug and Play ACPI device, IDs SYN1d1b SYN1d00 SYN0002 PNP0f13 (active)
[ 0.363394] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.363524] system 00:09: [io 0x0240-0x0259] has been reserved
[ 0.363991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.364879] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[ 0.365372] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.365873] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.366363] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.366857] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367408] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.367898] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.368395] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.368805] system 00:0c: [io 0x0400-0x047f] has been reserved
[ 0.369252] system 00:0c: [io 0x0500-0x053f] has been reserved
[ 0.369693] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.370228] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.370705] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.371182] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.371676] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.372171] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372179] pnp: PnP ACPI: found 13 devices
[ 0.380957] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.381648] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.381656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.381662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.381681] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.381688] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.381708] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.381726] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.381733] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.381781] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[ 0.382273] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.382870] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.383462] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.384060] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.384646] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.385095] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.385545] pci 0000:00:1c.3: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.385998] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.386387] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.386830] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.387314] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.387902] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.388285] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.388736] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.389226] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.389817] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.390233] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.390690] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.391180] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.391775] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.392157] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.392608] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.393098] pci 0000:00:1c.3: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.393700] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.394103] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.394108] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.394113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.394117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.394122] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[ 0.394126] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[ 0.394131] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 0.394135] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[ 0.394140] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.394144] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[ 0.394149] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.394153] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.394158] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.394162] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.394166] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.394171] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.394175] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.394179] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.394184] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.394188] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 0.394193] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.394197] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.394202] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.394206] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.394210] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[ 0.394215] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[ 0.394219] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 0.394224] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[ 0.394458] NET: Registered protocol family 2
[ 0.395149] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.395801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.396424] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.397028] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.397512] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.398146] NET: Registered protocol family 1
[ 0.398540] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.401674] PCI: CLS 64 bytes, default 64
[ 0.404203] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 0.408673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.410642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.411230] io scheduler noop registered
[ 0.411556] io scheduler deadline registered (default)
[ 0.412180] gpio_it87: Unknown Chip found, Chip 0202 Revision 2
[ 0.413720] hv_vmbus: registering driver hv_pci
[ 0.414138] hv_vmbus: registering driver hyperv_fb
[ 0.414552] intel_idle: MWAIT substates: 0x3020220
[ 0.414554] intel_idle: v0.4.1 model 0x36
[ 0.415019] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.415333] ACPI: AC Adapter [AC0] (on-line)
[ 0.440589] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.470262] ACPI: Lid Switch [LID]
[ 0.470749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.471442] ACPI: Sleep Button [SLPB]
[ 0.471890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.472528] ACPI: Power Button [PWRF]
[ 0.474911] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.475996] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.476418] ACPI: Thermal Zone [THRM] (63 C)
[ 0.477238] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.480090] Non-volatile memory driver v1.3
[ 0.483829] loop: module loaded
[ 0.484309] Guest personality initialized and is inactive
[ 0.484904] VMCI host device registered (name=vmci, major=10, minor=63)
[ 0.485403] Initialized host personality
[ 0.485993] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[ 0.487067] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[ 0.488126] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170728/utaddress-247)
[ 0.489188] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20170728/utaddress-247)
[ 0.490317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.VGA.TCOI) (20170728/utaddress-247)
[ 0.491442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.492164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.493231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[ 0.495362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.496081] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.497151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20170728/utaddress-247)
[ 0.498214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.498935] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.499659] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.500186] hv_vmbus: registering driver hv_storvsc
[ 0.500738] ahci 0000:00:1f.2: version 3.0
[ 0.501106] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.501649] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.502258] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 0.504418] scsi host0: ahci
[ 0.505055] scsi host1: ahci
[ 0.505678] scsi host2: ahci
[ 0.506330] scsi host3: ahci
[ 0.506778] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[ 0.507357] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[ 0.507918] ata3: DUMMY
[ 0.508159] ata4: DUMMY
[ 0.508915] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[ 0.509469] hv_vmbus: registering driver hv_netvsc
[ 0.509854] Fusion MPT base driver 3.04.20
[ 0.510250] Copyright (c) 1999-2008 LSI Corporation
[ 0.510709] Fusion MPT SPI Host driver 3.04.20
[ 0.511120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.511607] ehci-pci: EHCI PCI platform driver
[ 0.512763] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.513192] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.513793] ehci-pci 0000:00:1d.7: debug port 1
[ 0.514113] ACPI: Battery Slot [BAT0] (battery present)
[ 0.518488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.518522] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[ 0.540123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.541063] hub 1-0:1.0: USB hub found
[ 0.541418] hub 1-0:1.0: 8 ports detected
[ 0.542734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.543221] ohci-pci: OHCI PCI platform driver
[ 0.543620] ohci-platform: OHCI generic platform driver
[ 0.544568] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.544990] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.546233] xhci_hcd 0000:02:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00080010
[ 0.547982] hub 2-0:1.0: USB hub found
[ 0.548435] hub 2-0:1.0: 2 ports detected
[ 0.549241] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.549668] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.550303] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 0.550935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.551899] hub 3-0:1.0: USB hub found
[ 0.552349] hub 3-0:1.0: 2 ports detected
[ 0.553301] usbcore: registered new interface driver usb-storage
[ 0.553955] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.556563] i8042: Detected active multiplexing controller, rev 1.1
[ 0.559170] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.559568] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.559965] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.560407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.560808] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.561255] hv_vmbus: registering driver hyperv_keyboard
[ 0.561774] rtc_cmos 00:03: RTC can wake from S4
[ 0.562370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.562869] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.564393] sdhci: Secure Digital Host Controller Interface driver
[ 0.564865] sdhci: Copyright(c) Pierre Ossman
[ 0.566006] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.566486] hv_vmbus: registering driver hid_hyperv
[ 0.566915] usbcore: registered new interface driver usbhid
[ 0.567337] usbhid: USB HID core driver
[ 0.567684] hv_utils: Registering HyperV Utility Driver
[ 0.568088] hv_vmbus: registering driver hv_util
[ 0.568454] hv_vmbus: registering driver hv_balloon
[ 0.569382] NET: Registered protocol family 10
[ 0.570351] Segment Routing with IPv6
[ 0.570715] NET: Registered protocol family 17
[ 0.571097] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.571999] 8021q: 802.1Q VLAN Support v1.8
[ 0.572509] NET: Registered protocol family 40
[ 0.573685] microcode: sig=0x30661, pf=0x8, revision=0x10c
[ 0.574234] microcode: Microcode Update Driver: v2.2.
[ 0.574273] sched_clock: Marking stable (573441123, 0)->(657968060, -84526937)
[ 0.575503] registered taskstats version 1
[ 0.576740] rtc_cmos 00:03: setting system clock to 2018-09-07 16:15:12 UTC (1536336912)
[ 0.584900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.831528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.834278] ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
[ 0.834837] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.837583] ata1.00: configured for UDMA/133
[ 0.838642] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5
[ 0.841240] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.841885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.842433] sd 0:0:0:0: [sda] Write Protect is off
[ 0.842862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.843052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.877982] sda: sda1 sda2
[ 0.880409] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.171549] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.186977] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[ 1.194364] Freeing unused kernel memory: 1052K
[ 1.230632] Write protecting the kernel read-only data: 12288k
[ 1.235448] Freeing unused kernel memory: 2024K
[ 1.252890] Freeing unused kernel memory: 736K
[ 1.487895] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 1.488460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[ 1.566812] init: Console is alive
[ 1.796421] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.821964] pps_core: LinuxPPS API ver. 1 registered
[ 1.822364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.823647] PTP clock support registered
[ 1.824343] Button Hotplug driver version 0.4.1
[ 1.824818] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 1.830753] init: - preinit -
[ 1.890124] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 2.267747] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.309827] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.316834] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.470351] usb 1-7: new high-speed USB device number 4 using ehci-pci
[ 2.490506] clocksource: Switched to clocksource tsc
[ 2.691721] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 2.692832] scsi host4: usb-storage 1-7:1.0
[ 3.754161] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.765748] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.433172] urandom_read: 5 callbacks suppressed
[ 5.433177] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.722679] F2FS-fs (loop0): Mounted with checkpoint version = 1a030d9d
[ 5.751832] mount_root: switching to f2fs overlay
[ 5.833723] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 5.839672] urandom-seed: Seeding with /etc/urandom.seed
[ 5.914891] procd: - early -
[ 6.557234] procd: - ubus -
[ 6.596946] random: ubusd: uninitialized urandom read (4 bytes read)
[ 6.610617] procd: - init -
[ 6.950178] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.954303] tun: Universal TUN/TAP device driver, 1.6
[ 6.958028] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.958547] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.961325] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 6.961834] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 6.964069] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.426558] Netfilter messages via NETLINK v0.30.
[ 7.428839] ip_set: protocol 6
[ 7.450984] i2c /dev entries driver
[ 7.487885] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 7.488578] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 7.492106] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 7.492562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 7.494282] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.898600] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 8.147745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.149259] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000000b000, e8:40:f2:3f:a9:58, XID 00a00000 IRQ 30
[ 8.154185] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[ 8.155901] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.174092] xt_time: kernel timezone is -0000
[ 8.411155] Intel(R) Wireless WiFi driver for Linux
[ 8.411610] Copyright(c) 2003- 2015 Intel Corporation
[ 8.445655] PPP generic driver version 2.4.2
[ 8.447497] NET: Registered protocol family 24
[ 8.454488] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 8.455168] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUG disabled
[ 8.455610] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
[ 8.456054] iwlwifi 0000:04:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
[ 8.456529] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[ 8.501089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 8.504079] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 11.792405] r8169 0000:03:00.0 eth0: link down
[ 11.792453] r8169 0000:03:00.0 eth0: link down
[ 11.903937] random: fast init done
[ 13.415479] r8169 0000:03:00.0 eth0: link up
[ 30.131354] random: crng init done
https://code.fe80.eu/openwrt/openwrt/-/issues/966
ar71xx: images are not named to their board_names
2019-09-10T10:42:04Z
aparcar
ar71xx: images are not named to their board_names
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=966
Create an image using the imagebuilder (e.g. ar71xx/generic)
- make PROFILE=ubnt-loco-m-xw image
- the resulting image is than named lede-a...
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=966
Create an image using the imagebuilder (e.g. ar71xx/generic)
- make PROFILE=ubnt-loco-m-xw image
- the resulting image is than named lede-ar71xx-generic-ubnt-loco-m-xw-squashfs-factory.bin
- but looking into /tmp/sysinfo/board_name it’s called “loco-m-xw”
original reporter: aparcar
Additional reference:
https://github.com/aparcar/gsoc17-attended-sysupgrade/issues/26#issuecomment-321918497
https://code.fe80.eu/openwrt/openwrt/-/issues/863
ath9k failure with AP+11s VIFs ("unsupported hw bitrate detected")
2019-09-10T10:41:10Z
aparcar
ath9k failure with AP+11s VIFs ("unsupported hw bitrate detected")
Username: Matthias Schiffer
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=863
A Gluon user reported the following issue, observed on a TL-WR841N v9 (QCA953x). LEDE version is 17.01.2.
Gluon uses AP+11s VIFs, with multi...
Username: Matthias Schiffer
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=863
A Gluon user reported the following issue, observed on a TL-WR841N v9 (QCA953x). LEDE version is 17.01.2.
Gluon uses AP+11s VIFs, with multicast_rate set to 12000.
The WLAN became unusable (no connection possible, WLAN LED permantently on) after a few hours of operation. Both VIFs were affected. The system recovered on its own after an hour in this state. Unfortunately, I have no information if beacons were still running in the broken state.
After the recovery, the large number of messages like the following were found in the kernel log:
[40085.953696] ath: phy0: unsupported hw bitrate detected 0x73 using 1 Mbit
[40200.844082] ath: phy0: unsupported hw bitrate detected 0x48 using 1 Mbit
[40281.298039] ------------[ cut here ]------------
[40281.303081] WARNING: CPU: 0 PID: 0 at compat-wireless-2017-01-31/net/mac80211/rx.c:4214 ieee80211_rx_napi+0x130/0x8b0 [mac80211]()
[40281.315230] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 100 (0x64)
[40281.325023] Modules linked in: iptable_nat ath9k nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute ath9k_common xt_time xt_tcpudp xt_state xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG xt_CT nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack mac80211 iptable_mangle iptable_filter ip_tables ebtables ebt_vlan ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip6 ebt_ip ebt_dnat ebt_arpreply ebt_arp ebt_among ebt_802_3 br_netfilter ath9k_hw ath em_nbyte em_cmp sch_pie em_meta sch_gred sch_teql act_ipt sch_prio em_text sch_codel sch_red sch_fq sch_sfq sch_dsmark act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_htb sch_hfsc batman_adv libcrc32c cfg80211 compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables dummy veth tun act_police cls_basic sch_tbf sch_ingress gpio_button_hotplug crc16 crc32c_generic crypto_hash
[40281.433128] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.4.71 #0
[40281.440330] Stack : 803e32a4 00000000 00000001 80440000 8042d1dc 8042ce63 803c48ac 00000000
[40281.440330] 804a378c 00000004 00000000 8180e918 00000000 800a7664 803c9fa8 80430000
[40281.440330] 00000003 00000004 803c83b4 81809d5c 00000000 800a55e0 00000002 00000000
[40281.440330] 8042bf70 801f5300 00000000 00000000 00000000 00000000 00000000 00000000
[40281.440330] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[40281.440330] ...
[40281.477351] Call Trace:
[40281.479951] [<800a7664>] vprintk_default+0x24/0x30
[40281.484917] [<800a55e0>] printk+0x2c/0x38
[40281.489077] [<801f5300>] serial8250_get_mctrl+0x30/0x54
[40281.494512] [<80081c60>] warn_slowpath_common+0xa0/0xd0
[40281.499949] [<801a772c>] dump_stack+0x14/0x28
[40281.504473] [<80071ea8>] show_stack+0x50/0x84
[40281.509003] [<80081c60>] warn_slowpath_common+0xa0/0xd0
[40281.514543] [<80e25cf0>] ieee80211_rx_napi+0x130/0x8b0 [mac80211]
[40281.520918] [<80081cbc>] warn_slowpath_fmt+0x2c/0x38
[40281.526158] [<80e25cf0>] ieee80211_rx_napi+0x130/0x8b0 [mac80211]
[40281.532495] [<802623ec>] __build_skb+0x48/0xc8
[40281.537148] [<802625d0>] __netdev_alloc_skb+0xd0/0x148
[40281.542477] [<80060bf4>] handle_int+0x134/0x140
[40281.547181] [<80de8388>] ath9k_cmn_rx_skb_postprocess+0x50/0x168 [ath9k_common]
[40281.554852] [<80e88374>] ath_rx_tasklet+0xee8/0xf4c [ath9k]
[40281.560635] [<8006503c>] __bzero+0xa0/0x164
[40281.565012] [<80e88340>] ath_rx_tasklet+0xeb4/0xf4c [ath9k]
[40281.570828] [<80e851b8>] ath9k_tasklet+0x200/0x28c [ath9k]
[40281.576512] [<80084820>] tasklet_action+0x80/0xc8
[40281.581390] [<800841dc>] __do_softirq+0x250/0x298
[40281.586284] [<800a82bc>] generic_handle_irq+0x24/0x3c
[40281.591540] [<8006a9e0>] plat_irq_dispatch+0xd4/0x10c
[40281.596760] [<80060bf4>] handle_int+0x134/0x140
[40281.601447]
[40281.602992] ---[ end trace f41ea26ed5101c02 ]---
Both the numbers in the “unsupported hw bitrate detected” messages and the status→rate_idx values in the WARNINGs are seemingly random.
https://code.fe80.eu/openwrt/openwrt/-/issues/692
WLAN AP not working on RasPi (bcm2710 target)
2019-09-10T10:40:28Z
aparcar
WLAN AP not working on RasPi (bcm2710 target)
Username: Thomas Ganter
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=692
When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.
Some sc...
Username: Thomas Ganter
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=692
When flashing the brcm2708 / bcm2710 target the WiFi interface gets stuck in “client mode” and the AP will not be able to be brought up.
Some screenshots and a load of discussion here:
https://forum.lede-project.org/t/ap-mode-radio0-in-raspi-3-always-acts-as-a-client-shows-as-wlan0-in-luci/2885
Two more days of tinkering, wifi-up’ing and -down’ing did not bring me further.
I flashed another Pi3 (to exclude a hardware defect) with the same result.
I tried latest snapshot and stable images.
I am happy to help debug – tell me what you need me to do.
Greetings,
–Thomas
https://code.fe80.eu/openwrt/openwrt/-/issues/634
Factory flashing fails because LEDE filename is too long (>= 64 chars)
2019-09-10T10:39:23Z
aparcar
Factory flashing fails because LEDE filename is too long (>= 64 chars)
Username: Baptiste Jonglez
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=634
On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.
This is caused by a stupid check that...
Username: Baptiste Jonglez
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=634
On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.
This is caused by a stupid check that refuses filename longer than 64 chars in the web interface. The check is implemented in javascript and returns a cryptic error message like “Please select a file to upload”, as if no file was selected.
The current naming scheme is quite long:
$ echo ‘lede-17.01.0-r3205-59508e3-ar71xx-generic-tl-wr841-v11-squashfs-factory-eu.bin’ | wc -c
79
Shortening the name like the following would decrease the length below 64 chars, and leave some space for a custom suffix (e.g. using EXTRA_IMAGE_NAME in the Imagebuilder):
$ echo ‘lede-17.01.0-ar71xx-tlwr841v11-squashfs-factory-eu.bin’ | wc -c
55
https://code.fe80.eu/openwrt/openwrt/-/issues/609
procd: implement runlevel 1
2019-09-10T10:40:24Z
aparcar
procd: implement runlevel 1
Username: Stijn Tintel
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=609
Sysupgrade currently kills processes with SIGKILL if they don’t shut down within 3 seconds after the SIGTERM signal. Some processes (e.g. domoticz...
Username: Stijn Tintel
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=609
Sysupgrade currently kills processes with SIGKILL if they don’t shut down within 3 seconds after the SIGTERM signal. Some processes (e.g. domoticz) can take longer than 3 seconds to properly shut down. As this can potentially corrupt the sqlite database, it should be avoided.
While talking about this on
IRC
, it was suggested we should implement an “init 1” equivalent in procd. Adding this ticket as a reminder.
https://code.fe80.eu/openwrt/openwrt/-/issues/598
842nd doesnt flash successful with factory image using the tftp-recover over ...
2019-09-10T10:40:03Z
aparcar
842nd doesnt flash successful with factory image using the tftp-recover over the bootloader
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=598
Device: 842nd v3.1
LEDE: 17.01
Go into recovery tftp mode by pressing first the WPS/Reset button and now connect the power.
The device ent...
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=598
Device: 842nd v3.1
LEDE: 17.01
Go into recovery tftp mode by pressing first the WPS/Reset button and now connect the power.
The device enters tftp recovery to download via tftp from 192.168.0.66 file (wr842nv3_tp_recovery.bin)
The device *seems* to accept the flash (sorry, no serial to confirm).
On boot, the device doesn’t show leds nor it accepts any packets on ipv6 on any port (ping ff02::1) or ping to 192.168.1.1.
I guess this happens, because the oem flasher doesn’t flash all blocks of the factory image.
To recover from this state:
- flash via tftp recovery
- enter LEDE rescue/recovery
- ssh root@192.168.1.1
- use sysupgrade image
Task:
- confirm this happens also with trunk
- use serial to get more debug
https://code.fe80.eu/openwrt/openwrt/-/issues/588
openvpn-mbedtls crash on mpc85xx with signal 4 (SIGILL)
2019-09-10T10:38:32Z
aparcar
openvpn-mbedtls crash on mpc85xx with signal 4 (SIGILL)
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=588
device: tp-link wdr4900
affected version: lede 17.01 / openvpn-mbedtls - 2.4.0-3
openvpn config:
dev tun-monitoring
remote somehost 1194
...
Username: Alexander Couzens
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=588
device: tp-link wdr4900
affected version: lede 17.01 / openvpn-mbedtls - 2.4.0-3
openvpn config:
dev tun-monitoring
remote somehost 1194
ca /etc/openvpn/monitoring-vpn/ca.crt
cert /etc/openvpn/monitoring-vpn/xyz.crt
key /etc/openvpn/monitoring-vpn/xyz.key
tls-auth /etc/openvpn/monitoring-vpn/ta.key 1
remote-cert-tls server
keepalive 10 120
cipher AES-256-CBC
comp-lzo yes
persist-key
persist-tun
https://code.fe80.eu/openwrt/openwrt/-/issues/395
mac80211.sh: detect_mac80211 should check available channels
2019-09-10T10:39:04Z
aparcar
mac80211.sh: detect_mac80211 should check available channels
Username: Rafał Miłecki
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=395
This problem was reported by few Netgear R8000 users and I managed to reproduce it. It’s related to the following code:
vht_cap=$(iw phy "$dev" ...
Username: Rafał Miłecki
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=395
This problem was reported by few Netgear R8000 users and I managed to reproduce it. It’s related to the following code:
vht_cap=$(iw phy "$dev" info | grep -c 'VHT Capabilities')
cap_5ghz=$(iw phy "$dev" info | grep -c "Band 2")
[ "$vht_cap" -gt 0 -a "$cap_5ghz" -gt 0 ] && {
mode_band="a";
channel="36"
htmode="VHT80"
}
Default htmode
The first problem is that even if hardware supports VHT80 it may be not available for every/any current channel. If channel 36 doesn’t support VHT80, for better user experience, it shouldn’t be set in /etc/config/wireless by default. Example:
root@lede:/# iw phy phy2 info
Wiphy phy2
max # scan SSIDs: 10
max scan IEs length: 2048 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports roaming.
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
* P2P-device
Band 2:
Capabilities: 0x1062
HT20/HT40
Static SM Power Save
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-23
VHT Capabilities (0x0c025820):
Max MPDU length: 3895
Supported Channel Width: neither 160 nor 80+80
short GI (80 MHz)
SU Beamformer
SU Beamformee
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Frequencies:
* 5170 MHz [34] (disabled)
* 5180 MHz [36] (20.0 dBm)
* 5190 MHz [38] (disabled)
* 5200 MHz [40] (20.0 dBm)
* 5210 MHz [42] (disabled)
* 5220 MHz [44] (20.0 dBm)
* 5230 MHz [46] (disabled)
* 5240 MHz [48] (20.0 dBm)
* 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
* 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
* 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
* 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
* 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
* 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
* 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
* 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
* 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
* 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
* 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
* 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
* 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
* 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
* 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
* 5720 MHz [144] (disabled)
* 5745 MHz [149] (disabled)
* 5765 MHz [153] (disabled)
* 5785 MHz [157] (disabled)
* 5805 MHz [161] (disabled)
* 5825 MHz [165] (disabled)
valid interface combinations:
* #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
total <= 3, #channels <= 1
* #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
total <= 4, #channels <= 1
* #{ AP } <= 4,
total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy2 channels
Band 2:
* 5170 MHz [34] (disabled)
* 5180 MHz [36]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40+
* 5190 MHz [38] (disabled)
* 5200 MHz [40]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40-
* 5210 MHz [42] (disabled)
* 5220 MHz [44]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40+
* 5230 MHz [46] (disabled)
* 5240 MHz [48]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40-
* 5260 MHz [52]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40+
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5280 MHz [56]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40-
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5300 MHz [60]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40+
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5320 MHz [64]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40-
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5500 MHz [100]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40+
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5520 MHz [104]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40-
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5540 MHz [108]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40+
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5560 MHz [112]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40-
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5580 MHz [116]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40+
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5600 MHz [120]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40-
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5620 MHz [124]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40+
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5640 MHz [128]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40-
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5660 MHz [132]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40+
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5680 MHz [136]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz HT40-
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5700 MHz [140]
Maximum TX power: 20.0 dBm
No IR
Radar detection
Channel widths: 20MHz
DFS state: usable (for 163 sec)
DFS CAC time: 0 ms
* 5720 MHz [144] (disabled)
* 5745 MHz [149] (disabled)
* 5765 MHz [153] (disabled)
* 5785 MHz [157] (disabled)
* 5805 MHz [161] (disabled)
* 5825 MHz [165] (disabled)
as you can see, VHT80 isn’t support on any currently available channel due to regulatory limits.
Default channel
Picking channel 36 blindly is a bad idea as it may not be available. In case of phy0/radio0 on Netgear R8000 only available channels are 149+ due to hardware/board design (see
ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000
).
root@lede:/# iw phy phy0 info
Wiphy phy0
max # scan SSIDs: 10
max scan IEs length: 2048 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports roaming.
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
* P2P-device
Band 2:
Capabilities: 0x1062
HT20/HT40
Static SM Power Save
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-23
VHT Capabilities (0x0c025820):
Max MPDU length: 3895
Supported Channel Width: neither 160 nor 80+80
short GI (80 MHz)
SU Beamformer
SU Beamformee
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Frequencies:
* 5170 MHz [34] (disabled)
* 5180 MHz [36] (disabled)
* 5190 MHz [38] (disabled)
* 5200 MHz [40] (disabled)
* 5210 MHz [42] (disabled)
* 5220 MHz [44] (disabled)
* 5230 MHz [46] (disabled)
* 5240 MHz [48] (disabled)
* 5260 MHz [52] (disabled)
* 5280 MHz [56] (disabled)
* 5300 MHz [60] (disabled)
* 5320 MHz [64] (disabled)
* 5500 MHz [100] (disabled)
* 5520 MHz [104] (disabled)
* 5540 MHz [108] (disabled)
* 5560 MHz [112] (disabled)
* 5580 MHz [116] (disabled)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (disabled)
* 5680 MHz [136] (disabled)
* 5700 MHz [140] (disabled)
* 5720 MHz [144] (disabled)
* 5745 MHz [149] (20.0 dBm)
* 5765 MHz [153] (20.0 dBm)
* 5785 MHz [157] (20.0 dBm)
* 5805 MHz [161] (20.0 dBm)
* 5825 MHz [165] (20.0 dBm)
valid interface combinations:
* #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
total <= 3, #channels <= 1
* #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
total <= 4, #channels <= 1
* #{ AP } <= 4,
total <= 4, #channels <= 1, STA/AP BI must match
root@lede:/# iw phy phy0 channels
Band 2:
* 5170 MHz [34] (disabled)
* 5180 MHz [36] (disabled)
* 5190 MHz [38] (disabled)
* 5200 MHz [40] (disabled)
* 5210 MHz [42] (disabled)
* 5220 MHz [44] (disabled)
* 5230 MHz [46] (disabled)
* 5240 MHz [48] (disabled)
* 5260 MHz [52] (disabled)
* 5280 MHz [56] (disabled)
* 5300 MHz [60] (disabled)
* 5320 MHz [64] (disabled)
* 5500 MHz [100] (disabled)
* 5520 MHz [104] (disabled)
* 5540 MHz [108] (disabled)
* 5560 MHz [112] (disabled)
* 5580 MHz [116] (disabled)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (disabled)
* 5680 MHz [136] (disabled)
* 5700 MHz [140] (disabled)
* 5720 MHz [144] (disabled)
* 5745 MHz [149]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40+ VHT80
* 5765 MHz [153]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40- VHT80
* 5785 MHz [157]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40+ VHT80
* 5805 MHz [161]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz HT40- VHT80
* 5825 MHz [165]
Maximum TX power: 20.0 dBm
Channel widths: 20MHz
https://code.fe80.eu/openwrt/openwrt/-/issues/227
VLAN support mismatch between preinit and default network config
2019-09-10T10:38:49Z
aparcar
VLAN support mismatch between preinit and default network config
Username: Carlo
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=227
PPPoE is broken on WRT1900ACS
Upgraded from Lede r578 to latest Lede r1814 and PPPOE doesn’t work anymore altough the pppd version and PPPoE version are...
Username: Carlo
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=227
PPPoE is broken on WRT1900ACS
Upgraded from Lede r578 to latest Lede r1814 and PPPOE doesn’t work anymore altough the pppd version and PPPoE version are the same:
- Linksys WRT1900ACS
- LEDE reboot r1814
pppd debug log:
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
While on the same hardware running LEDE r578, the PPPoE module works as expected:
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Send PPPOE Discovery V1T1 PADI session 0×0 length 4
dst ff:ff:ff:ff:ff:ff src c2:56:27:ca:d7:d4
[service-name]
Recv PPPOE Discovery V1T1 PADO session 0×0 length 40
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name] [AC-name acc-aln1.hac] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Send PPPOE Discovery V1T1 PADR session 0×0 length 24
dst a0:f3:e4:34:d8:21 src c2:56:27:ca:d7:d4
[service-name] [AC-cookie 75 58 37 a5 ba 3c e4 a5 2a 61 bb 23 92 5c 1b dc]
Recv PPPOE Discovery V1T1 PADS session 0x30b length 4
dst c2:56:27:ca:d7:d4 src a0:f3:e4:34:d8:21
[service-name]
PADS: Service-Name: ‘’ PPP session is 779
Connected to a0:f3:e4:34:d8:21 via interface eth0
using channel 2
Using interface pppoe-wan
Connect: pppoe-wan ←→ eth0
sent [LCP ConfReq id=0×1 <mru 1492> <magic 0xc6952556>]
rcvd [LCP ConfReq id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
sent [LCP ConfAck id=0×66 <mru 1492> <auth chap MD5> <magic 0x4cc73648>]
rcvd [LCP ConfAck id=0×1 <mru 1492> <magic 0xc6952556>]
sent [LCP EchoReq id=0×0 magic=0xc6952556]
rcvd [CHAP Challenge id=0×1 <7131a44524d1de8f1cd1061cac6d8c071d8bfe7351bc4ea7bd08f56684428475f229ba177a192696ebab32>, name = “acc-aln1.hac”]
sent [CHAP Response id=0×1 <4bb1a418b298790b128ad4d7ef3109ad>, name = “bthomehub@btbroadband.com”]
rcvd [LCP EchoRep id=0×0 magic=0x4cc73648]
rcvd [CHAP Success id=0×1 “CHAP authentication success”]
CHAP authentication succeeded: CHAP authentication success
CHAP authentication succeeded
peer from calling number A0:F3:E4:34:D8:21 authorized
sent [IPCP ConfReq id=0×1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
sent [IPV6CP ConfReq id=0×1 <addr fe80::c595:37d1:3987:1929>]
rcvd [IPV6CP ConfReq id=0x7b <addr fe80::0221:05ff:feb4:8824>]
sent [IPV6CP ConfAck id=0x7b <addr fe80::0221:05ff:feb4:8824>]
rcvd [IPCP ConfReq id=0×38 <addr 172.16.12.12>]
sent [IPCP ConfAck id=0×38 <addr 172.16.12.12>]
rcvd [IPCP ConfNak id=0×1 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
sent [IPCP ConfReq id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
rcvd [IPV6CP ConfAck id=0×1 <addr fe80::c595:37d1:3987:1929>]
local LL address fe80::c595:37d1:3987:1929
remote LL address fe80::0221:05ff:feb4:8824
Script /lib/netifd/ppp-up started (pid 2646)
rcvd [IPCP ConfAck id=0×2 <addr 81.146.2.155> <ms-dns1 81.139.57.100> <ms-dns2 81.139.56.100>]
local IP address 81.146.2.155
remote IP address 172.16.12.12
primary
DNS
address 81.139.57.100
secondary
DNS
address 81.139.56.100
ppp.log
secondary
DNS
address 81.139.56.100
Script /lib/netifd/ppp-up started (pid 2653)
Script /lib/netifd/ppp-up finished (pid 2646), status = 0×9 Script /lib/netifd/ppp-up finished (pid 2653), status = 0×9
https://code.fe80.eu/openwrt/openwrt/-/issues/97
dnsmasq doesn't receive updated dns servers when running inside ujail
2019-09-10T10:39:08Z
aparcar
dnsmasq doesn't receive updated dns servers when running inside ujail
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=97
Bind-mounting /tmp/resolv.conf.auto apparently doesn’t forward inotify events arriving from the kernel when resolv.conf.auto was changed (e.g. upst...
Username: Daniel Golle
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=97
Bind-mounting /tmp/resolv.conf.auto apparently doesn’t forward inotify events arriving from the kernel when resolv.conf.auto was changed (e.g. upstream
DNS
servers were received by a DHCP client or pppd). Restarting dnsmasq or running it without ujail solves the issue.