CPE210 V1.1 Brick after update 18.06.04
Username: Jatito
Origin: https://bugs.openwrt.org/index.php?do=details&task_id=2370
Trying to update to the latest version (openwrt-18.06.4-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin) has failed and has entered into safeloader. I put it to your knowledge in case there is a fault in the firmware.
CPE210 V1.1 with openwrt-18.06.2-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin
With a USB serial cable:
“TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check.. PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0×4017)
Data flash init failed.
open user-config failed.
open user-config failed.
enet0 port4 up
TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘recovery.bin’.
TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0x83832c86, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##Warning: File is unidentiable. Try downloading
TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘vmlinuz’.
TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0×83832206, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##ERROR: Can’t download image.
Password”